1. You must assemble the plane according to the
instructions. Do not alter or modify the model, as
doing so may result in an unsafe or unflyable model.
In a few cases the instructions may differ slightly
from the photos or plan. In those instances the
written instructions should be accepted as correct.
2. You must take time to build straight, true and strong.
These are the items "not included" with your kit, that
you
will
need to purchase separately.
Items
in
parentheses (GPMQ3141) are suggested part
numbers recognized by distributors and hobby
shops and are listed for your ordering convenience.
GPM is the Great Planes® brand, TOP is the Top
Flite®
brand
and HCA
is
the
Hobbico®
brand.
3. You must install all R/C and other components so
that the model operates properly on the ground and
in the air.
4. You must test the operation of the model before the
first and each successive flight to insure that all
equipment operates correctly. You must also make
certain that the model has remained structurally sound.
NOTE: We, as the kit manufacturer, can provide
you with a quality kit and great instructions, but
ultimately the quality and flyability of your finished
model depends on how you assemble it; therefore,
we cannot in any way guarantee the performance
of your completed model and no representations
are expressed or implied as to the performance or
safety of your completed model.
4 channel radio with 3 standard, 2 high torque
and one quarter scale servo.
Engine - 1.08 to 1.5 2-stroke or 1.2 to 1.6
4-stroke
Engine mount and mounting hardware
16oz.Fueltank(GPMQ4107)
Standard fuel tubing (GPMQ4131)
(2) 5" to 6" main wheels
(1) 1-1/2" tail wheel (GPMQ4243)
(4) 1/4" Wheel collars (DUBQ1200)
(2) 1/8" Wheel collars (GPMQ4304)
Top Flite® MonoKote® covering film (4 rolls)
or Coverite™ 21 st Century® Fabric
Paint for fuelproofing, the engine cowl and
the windshields
(1)OR(2) 1/3 Scale pilot(s)
1/4" Latex Foam Rubber (HCAQ1000)
These
are the adhesives
and
supplies
that
you
will
need to build your Pt-19. We recommend Great
Planes Pro™ CA and Epoxy
Please inventory and inspect all parts carefully
before starting to build! If any parts are missing,
broken or defective or if you have any questions
about building or flying this model, please call us at
(217) 398-8970 and we'll be glad to help. If you are
calling for replacement parts, please look up the
part numbers and have them ready when calling.
4 oz. Thin CA Adhesive - (GPMR6004)
2 oz. Thick CA Adhesive - (GPMR6015)
CA Accelerator - (HCAR3750)
CA Applicator Tips - (HCAR3780)
6-Minute Epoxy - (GPMR6045)
30-Minute Epoxy - (GPMR6047)
4 oz. Aliphatic Resin Glue (GPMR6161)
3
(44 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels